Averatec gives us options, but not the right ones

I received a call from Averatec Advanced Customer Care. After yesterday’s re-escalation from tier 1, that was pretty quick this time.They will not exchange our defective machine with a new one. This even though it is pretty obvious we have a “lemon” and we are certainly not to blame for the issues in their repair facility (which returns non-repaired machines to the customer) nor their shipping department (which in our case made
2 shipping errors during the 3 RMAs)

Our options are:
a) another repair
b) exchange it (for a refurbished unit it turns out)
c) refund (turns out to be partial).

Another repair? There is no quality control in the Averatec Repair Department so that is a no-brainer
really. This machine has been bouncing on trucks for 6 weeks already. Who says this repair will be the last one and will be professional? Why wasn’t the battery replaced as promised three times?

Exchange it? I initially said yes, till it became clear it would be for a refurbished machine. I don’t think that is a viable option, as that would means we are exchanging this machine (after 3 RMAs) for another one which has had 3 RMAs … and is refurbished by their technical department without QA. Absolutely not an option.

That leaves the refund. Which is actually only a partial refund as it is a used machine and according to Averatec has been used for 9 months. That translates for us to 2/3 of the purchase price.

Purchased 9 months ago? Yes.
But 9 months of use? No way.

They conveniently ignore that:
– this machine came with issues and we tried to troubleshoot in house first
– we have been troubleshooting with customer care over the phone since June/July (last summer)
– only after several mandatory steps were allowed to mail in the machine with RMA 1 (before they refused to accept it were hardware issues)
– since the first RMA (=November) have not had possession nor use of the machine, which is a total of 3.5 months!

In all honesty, I more than likely have spent more time troubleshooting this machine and dealing with Averatec; than Carolyn actually used it.

So, how in the world can they say we used it for 9 months when it about half of that time it was under RMA?

By the way: this machine still has the protective plastics on it and is absolutely clean plus scratch & dent free. So it is not like this machine is abused by a teenager and the issues are a result of misuse, inadequate care or so and we are looking for a free ride. Our systems are treated like babies.

Don’t get me wrong, we do not expect a full refund and understand that this machine is not new. But the facts are the facts and I think they should do better. Yes, OK, we were slow of the mark detecting issues. But, if you have a new machine, do you test every feature within the first week? Like test battery life? Back up data to DVDr? Check for dead pixels which may happen to be masked by the Averatec theme? I don’t think you do. Neither do I. Should we be penalize for that? Or for their lengthy repair procedure?

The way I look at it, I would say: ” We’re sorry and apologize for all the inconvenience. Here is a new
machine. If you like we will honor the purchase price as a credit towards the a different machine. ” Now that would be customer care. Sadly, all they do is alienate an existing repeat customer who will now not purchase their brand again, who will no longer recommend it to family, friends & colleagues and in the next user surveys will apply the correct votes for this vendor.

A final note about Averatec, Averatec Customer Care, Advanced Customer Care:

– Dead pixels. A screen is only replaced if you have two dead pixels side by side
– Battery replacement <6 months. We were promised a replacement under warranty, but have not received it.
– Technical Support / Customer Care. You will be required to wipe your machine and reset it to factory default. [maybe not if you have a dead hard drive]
– RMA. You will only receive an RMA after one or more factory resets and lots of other useless troubleshooting in our case.
– Ground shipping. RMA shipping is via Fedex Ground / Home Delivery. Because their repair facility is on the West coast, this means a 14 day total transit time from the East coast.
– The left hand does not know what the right hand does. During RMA the Averatec server gets infrequent updates. If you call in to check on the delay, Customer Care does not know what the repair facility does. Their server and the one from the repair facility only sync on weekday nights or whatever, so on more then one occasion the information was not up to date.
– Quality Control is absent. ( Three times we were promised a new battery, which we did not receive. Twice the optical drive went in for repair/exchange because of 1x burning. Twice it came back with an absolutely non-functional optical drive; and once it was protruding from the machine (unmistakably not installed correctly) )
– Return shipping is hit and miss. The initial return went to the wrong address even though it was noted in the system and on a paper with the machine.
– RMA 2 is still ground shipping. Customer Care can only ship ground and are only allowed to issue call tags, which means you have to be available 8 hours to allow the system to be picked up at your house or office. They do not issue a shipping # so you can drop it off at an authorized location at your convenience.
– RMA 3 = Advanced Customer Care. After two RMAs you can (or will) get bumped up a level and they will expedite shipping to 2-3 day air upon request. Upon request they will also give you a shipping label, instead of the pickup call tag. But, you need to call regular customer care yourself to explain the
issues you are having (again) to get a ticket #. Then you call that # in to advanced customer care so they can call you back after setting up shipping.
– After three RMAs, if there are still issues, you cannot continue working with your contact person from Advanced Customer Care. You need to call tier 1 /regular tech support, explain the situation, get a ticket # and request escalation. Another person takes the case.
– RMA #4? After three RMAs you can get another repair, an exchange for another refurbished unit or partial refund.

Leave a Reply

Your email address will not be published. Required fields are marked *